Most of the pots I make are done on the wheel. I remember taking my first pottery class where we explored the different ways of working with clay. First we made pinch pots, then moved on to coil and slab construction, all over a period of three or four classes. Then, it was time to put us on the potters wheel. After we had been introduced to the wheel, he let us choose what we wanted to do. Some people preferred hand building and some throwing.
I know why he left the wheel for last. He knew there were people like me who would be hooked and obsessed with getting back on the wheel. I remember 3 hr classes just whizzing by, leaving me hungry for more. It wasn’t long before I was ready for my own wheel, but, unfortunately, the timing wasn’t great as I was living in an apartment in downtown Toronto. So.. I continued to sign up for sessions, just to get on the wheel. Luckily, John gave us quite a bit of freedom with what we made and his classes, and once you reached a certain point, it was more like an open studio time with guidance along the way.
Once we moved out of the city, we insulated the garage, and I finally got my first wheel. It was a motorized Thomas Stewart and it had a huge concrete flywheel and a fixed seat. (Here’s a picture of a current Thomas Stewart/Scutt wheel, but mine had a big metal splashpan, which I didn’t much like, instead of the rectangular table pictured here). When the motor pedal was depressed and the rubber ring came in contact with the flywheel, the whole wheel vibrated like it was going to take off, as it built up speed. At first I really liked it, but over time I found myself avoiding throwing, which was totally unlike me. I came to the realization that the problem wasn’t me, but the wheel.
Now when I first got my wheel, I thought every wheel was about the same. I didn’t realize that each type/brand/kind had its own subtleties and that one should probably try a wheel out in advance to see if its the right one for you. Its like any tool: if you’re going to use it more than just occasionally, choose one that works well and makes using it a more pleasant experience. There’s not much point in investing a fair amount of money for a tool that is irritating to use.
I soon realized that what suited me better, was not a kickwheel at all. I ended up getting a Shimpo Master Series because it had lots of torque, it worked smoothly at lower speeds and with no jerky movements, it was quiet, it had a pedal i could move around and place where I wanted it, and I could move my chair to a position that was most comfortable for me to throw. I don’t think they make that particular model anymore, but it sure served me well.
Now I use primarily an old Soldner wheel, one made back in the 70s by Paul Soldner himself. It has some of the same qualities as my first Shimpo, only moreso! heheh Its really nice to use but what’s really nice about it is when its time to repair it, the parts are ones from off the shelf and it was really simply assembled. In comparison, we had a problem with an old Creative Industries wheel we had and was a pain to fix. There was only so much we could do on our own before the company requested that we send all the parts in to them so they could test them.. what a hassle. I don’t know why equipment manufacturers can’t just keep things simple. Anyone knows, making something more complicated, doesn’t necessarily mean it will work any better. Its not like we’re talking about upgrading what a potter’s wheel will do..
(I’ll post some of the info I gathered about the Soldner in one of my next posts, including the schematic I drew up. Might be useful for someone with the same wheel to have on hand, just in case.)