Jun 30 2008

In memory of..

Raku Urn with Magnolia Design

Magnolia Raku Pottery Jar by Anne Webb


Jun 7 2007

Snapshot: Lotuses & Dragonflies on raku



Lotuses & Dragonflies
Raku Vessel

Anne Webb, 2007


May 21 2007

Webb Pottery & First Saturdays Art Market, Mobile AL

No, we haven’t fallen off the planet, just everywhere but the keyboard.
Here are a couple of shots of some raku pots I snapped at a show this weekend. Stylized dragonflies and lotuses bottle & a sweet bay magnolia jar.

Other news.. this spring’s last First Saturdays Art Market will be at Cathedral Square in downtown Mobile on June 2nd from 9 am to 3 pm (NB relocated from the Royal & Government location). There will be pottery and painting demonstrations, and starting at 7:30 am on the other side of the square will be Mainstreet Mobile’s Market on the Square farmer’s market. Hope you are able to join us as we go out with a bang.

(fyi This jar is one of the completed pieces from my February 3rd blog entry, where it appeared in unglazed.)


Feb 22 2007

Pottery Up on the block

One of the pieces we have up on ebay this week:

Raku Pottery Plate
Incised Spiral Design
approx 11 7/8″ W

by Anne Webb, Webb Pottery

ebay Item 130082820501

To view all our auctions, search for our
ebay ID: webbpots


Feb 14 2007

Webb Pottery Raku Vessels on eBay this week

Peacock Feather Designed Raku Jar, Anne Webb

Raku Jar with Stylized Peacock Feather Design
8.5″ H x 5.25″ W
by Anne Webb
Item #130079977793

Raku Bank with Art Nouveau Bee Motif, Anne & Lowell Webb

Raku Bank with Art Nouveau Stylized Bees
3″ H x 4.75″ W
by Lowell Webb, decorated by Anne Webb
Item #130079980946


Feb 3 2007

Raku pot in progress….

The only pictures of designed raku pottery I’ve had up on the blog have been finished ones. I thought it might be kinda cool to see what these pots look like in their raw state.

Here are a few I’ve been working on that are still very much in progress. One has an iris design and the other, bay magnolia. After studying a subject, whether it be a peacock feather or a particular flower, and making my sketches, I visualize the design layout then carefully carve it into the surface of the “leather hard” clay.
Green Webb Pot with Incised Iris design
Carving a design into clay is much different than drawing or painting it. The positioning of the tool initially can be tricky and carving, like anything else with pottery, takes practice. After you spend all that time and effort making that pot — throwing, trimming, and waiting for the clay to be just the right consistency– you have a lot invested and you don’t want to mess up. Once you lay your tool into the clay and make a cut, there is no going back or correcting it, so extra care needs to be taken.

Incised Bay Magnolia Design - raw clayAfter the carving is complete, the pot is left to dry usually for about a week or until it is “bone dry”. It is then bisque fired, glazed, then fired raku kiln. (Please see my post from July 18th for a description of the raku process).

I will try and post pictures of these pots again once they have been glazed and fired.


Sep 23 2006

Webb Art Pottery Stylized Art Nouveau Oleander Design – Raku Vase

Webb Raku Vase - Stylized Art Nouveau Oleander

Vase with Art Nouveau Stylized Oleander Design
Incised design, Raku fired

Approx 12″H x 6.5″W

Anne Webb, Webb Pottery, 2006

Recently listed on ebay: Item #130030461617


Aug 18 2006

Webb Raku Art Pottery on eBay: webbpots

Peacock Feather Motif Vessel
Approx 4.5″ H x 3.75″ W

Anne Webb, Webb Pottery, Magnolia Springs, 2006

This vessel was recently listed on ebay:
Item #130017712794
under Art: Self-Representing Artists category

NEW WORK POSTED ON OUR WEB PAGE
If you would like to see more raku pieces, please visit our web page and click on the “Original Art Works” section.

Thanks!


Aug 15 2006


Raku Pottery Vessel

Purple Tulips, Stylized Floral Design
Approximately 9.5″ H x 5.5″ W

Anne Webb, Webb Pottery
Magnolia Springs, 2006


Jul 18 2006

So about our Webb Raku & Stoneware Pottery…

Raku Bottle with Peacock Feather Motif, by Anne Webb,2006

In the past few months, I’ve posted pictures of some of our pottery here on the blog and on our web site, now here is a little info about it.

All our raku vessels, are individually formed, carved, brush-glazed, and fired, using an American variation of the Japanese firing technique known as raku.
Lowell covering a red-hot piece just taken from the kiln, with sawdust
A glazed pot is heated to approximately 1825 degrees Fahrenheit. Its then taken from the kiln while its still red-hot, gently placed in a bed of pine shavings, and then covered (as you can see in this picture, we use a wheelbarrow or on other occasions in a metal wash tub as our pine shavings receptacle). When the oxygen in the air surrounding the pot is depleted by the flame, the flame then looks to the glaze for more oxygen molecules to consume. A chemical reaction may take place in the glaze, causing spontaneous and random flashes of color and metallic lustre. As the pot cools, a random crackling (or crazing) of the glaze occurs as the clay and the glaze expand and contract at different rates. What also happens is the carbon from the burning shavings fuses to all the unglazed surfaces and cracks in the glaze, turning them black. The piece, still hot, is then extracted from its bed of shavings and is quenched (or rapidly cooled) with water. Doing so not only cools the pot to the touch, but sets the colors before theglazes have a chance to reoxidize. Some of the results can be quite spectacular and its easy to understand the allure of pottery fired in this way. No two peices ever turn out completely the same and every one, in its own way, is one-of-a-kind.

Lowell Webb Digging native Alabama clay from local depositsThe majority of stoneware clay we use for our functional pottery is from abundant native Alabama clay deposits, usually found within just an hour’s drive of the studio right here in Baldwin Country. The deposit Lowell working on here is right along a local roadside. The clay that seems to work best is whitish or, better Native Clay Gallon Pitcher with Iris Brushworkyet, almost a bubble gum color. It fires the highest and has the least amount of impurities which is perfect for durable functional ware. Our functional pottery is individually formed, most of it on a potter’s wheel, is individually decorated, and then high-fired in a propane fueled gas kiln to approximately 2400 degrees Fahrenheit.

I’ll have to cover in future posts some of the primitive-fired pieces we do as well as the ongoing journey of the building of our small wood kiln using recycled materials…